Jonathan Chappell Furniture / Cabinet Maker

A kitchen is one of the biggest purchases you will ever make after your house and car so it is vital that the job is done properly. We like to take a little bit more time to make sure you get what you want and that all the details are finished off. We do not believe in cheap materials or short cuts as this may result in problems later on.

Our cupboards are made from 16mm highly moisture resistant (HMR) particle board with a durable 1mm PVC tape applied to the exposed edges. All cupboard backs and drawer bottoms are made from the same 16mm HMR board and only top quality German made Blum hinges and drawer runners are used.

Many companies will cut corners by using 0.4mm edge tape 3mm backs and

Many companies will cut corners by using 0.4mm edge tape, 3mm backs and drawer bottoms as well as cheap hardware. The finished kitchen may look the same but it will not last. They may also save time in installation by not fixing down bench tops, not fixing sinks, not leveling the kick boards, not adjusting doors, not using ‘bump ons’, not routing dishwasher hoses properly and not using silicon to seal the bottom of the kick boards or bench tops.    

When we walk away from a job it is finished. None of these lazy shortcuts will be present.

Our commitment to you is to turn up when arranged, carry out the work as agreed within the deadline to the best quality standards.

After the initial meeting a quote will be sent for the work; once the quote has been accepted a second meeting will be arranged to finalize all details select finishes and check measurements. At this stage a contract or order will need to be signed as appropriate and a deposit paid. Within a few days drawings will be sent for one final check and the work commenced.